CE Smith Steel Step for Trailer Fender - 7" x 3" - Right Front/Left Rear - Qty 1
(20 reviews)
Price: $8.43
In Stock
CE Smith Steel Step for Trailer Fender - 7" x 3" - Right Front/Left Rear - Qty 1
Item # CE19012
Retail:$9.57
Our Price: $8.43
You Save: 12%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (20)
- Q & A (0)
- Videos (1)
- Photos
CE Smith Boat Trailer Parts - CE19012
- Steps
- 7 Inch Long
- 3 Inch Wide
- CE Smith
Provides easy access the bed of your trailer from the side. Bolts or welds to the rear of your driver's-side fender or the front of your passenger's-side fender. Gives you a non-slip step that can be primed and painted to match your trailer.
Features:
- Creates non-slip step on the fender for easy side access to your trailer
- Dimpled design provides grip
- Constructed of sturdy, 11-gauge steel
- Can be primed and painted to match your trailer
- Bolts or welds to your trailer's fender, welds to the frame
- Fits the rear of your driver's-side fender or the front of your passenger's-side fender
- Made in the USA
Specs:
- Dimensions: 7" long x 3" wide
- Quantity: 1 fender step
19012 11-Gauge Steel Fender Step Pad by CE Smith - Right Front/Left Rear
Video of CE Smith Steel Step for Trailer Fender - 7" x 3" - Right Front/Left Rear - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of CE Smith Boat Trailer Parts - Steel Fender Step - CE19012
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this trailer fender step. This is going to bolt or weld onto your trailer's fender and then it will weld onto your trailer's frame, that will provide a nice easy access to your trailer for you. This will fit on the front of your passenger side fender or at the rear of your driver's side fender. It is right at 7 inches, an overall length or width there. And then our depth is going to be right about 3 1/4 inch.
So it is gonna give us a nice surface to step up on, not for your whole foot, but enough to get you up there to give you enough support. It does have this dimpled design that's going to provide a nice non-slip grip for us. It is constructed of a sturdy 11-gauge steel. It can be primed and painted to match your trailer so it'll blend in and look nice for you. And it is made here in the USA so should be good quality materials.
Shouldn't have to worry about that. Should do a great job for you, allowing you to step up and have easier access to your trailer. So that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
CE Smith Steel Step for Trailer Fender - 7" x 3" - Right Front/Left Rear - Qty 1 - CE19012
Average Customer Rating: 4.8 out of 5 stars (20 Customer Reviews)
Provides easy access the bed of your trailer from the side. Bolts or welds to the rear of your driver's-side fender or the front of your passenger's-side fender. Gives you a non-slip step that can be primed and painted to match your trailer.by: Erminda05/11/2023
Just loved it
It really help me get in or out by side of
by: Brad06/21/2018
I just received the trailer steps by UPS today. It might be some time before I get them installed, but they are exactly as I expected and will hopefully fulfill my needs. Thanks
by: Ron E01/07/2015
E Trailers is very quick in shipment and knowledgeable. Love this company. Have used 3 to 4 times to order items needed for my various trailers and always received quickly and just what I wanted or anticipated.
by: Cecil 04/06/2023
As described
by: Jonathan 04/23/2021
Heavy duty. Well built and designed.
After one year of use I have no negative feedback
by: Michael 05/03/2021
Very small, and the strange bend (not level) makes it tricky to step onto as the steps lean/tilt down.
by: Stephen B.05/08/2013
Everything was perfect.Just as expected.
by: Gary04/15/2019
Great product
by: Steve 05/02/2024
by: Clyde06/30/2020
Works great.
by: James 05/04/2024
by: Kevin 04/26/2024
by: Kevin05/03/2024
by: Anthony 09/21/2022
by: Sebastian 08/17/2022
by: Jeff12/21/2018
Very good quality
by: Roger06/18/2019
A quality piece
by: Dave 12/30/2021
by: Sandra 10/22/2021
by: Wayne 03/17/2021
20
20
See what our Experts say about this CE Smith Boat Trailer Parts
- Replacement Universal Fender Steps For a 2002 BandS Sportsman Boat TrailerI have a couple universal options as I have no way to verify what parts were installed on your 2002 BandS Sportsman boat trailer. If none of these options listed below are what you are looking for please send me some images and measurements for your step and I can see what alternatives you have. HitchMate Boat Trailer Step # HE4036 CE Smith Galvanized Steel Step for 2" Trailer Frame # CE26212G-15284GA CE Smith Steel Step for Trailer Fender # CE19012, # CE19011
view full answer... - Recommended Replacement for Continental Knurled Aluminum 4" Channel Step PadI do have some step options for your boat trailer but we don't carry any factory parts such as the Continental Knurled Aluminum 4" Channel Step Pad. Instead, I recommend taking a look at one of the following: CE Smith Galvanized Steel Step part # CE26212G-15284GA HitchMate Boat Trailer Step part # HE4036 CE Smith Steel Step for Trailer Fender part # CE19011 for left front/right rear or part # CE19012 for right front/left rear The most universal of the above options is the HitchMate Boat...
view full answer... - Replacement Aluminum Fender Gusset Step for Trailstar Boat TrailerThe closest part we carry is the CE Smith Steel Step for Trailer Fender, part # CE19012. However, since you mentioned your boat is brand new, chances are you want the exact replacement. I recommend reaching out to the trailer manufacturer or whoever you purchased the boat/trailer from to source the direct replacement. Parts like the aluminum fender or gusset step are considered part of the trailer body/frame and are very specific to the particular trailer, which is why we do not carry them.
view full answer...
- Trailer Step Options for a Boat TrailerCurrently the only other style of trailer step we offer aside from the # HE4036 that you referenced would be trailer fender steps like part # CE19011 for the left front/right rear or the part # CE19012 for the right front/left rear.
view full answer... - Diamond Plate Fenders To Replace Single Axle Plastic Fenders On a Karavan Trailer With 16" WheelsI have a recommendation for you as we do not have an exact replacement step for the Karavan step fenders you have in diamond plate. You can mount the Single Axle Trailer Fender # HP23VR using the Step Brackets # CE19012 and # CE19011. These are not a direct replacement and will require you to weld on the steps and drill holes to mount the fenders.
view full answer... - Is CE Smith Steel Step for Trailer Fender # CE19012 Made of Stainless SteelThe CE Smith Steel Step for Trailer Fender # CE19012 that you referenced is not made of stainless steel. It is made of 11-gauge steel that is intended to be primed and painted before being bolted or after being welded in place. The matching part for the opposite side is # CE19011.
view full answer...
Do you have a question about this Boat Trailer Part?
Info for this part was:
Written by:
David L
Installed by:
Michael B
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Erminda
5/12/2024
Really Great!!